Contact Us


217 Connell Street

Goodlettsville, TN 37072

Map »

​Tel: 615-859-5754

  • White Facebook Icon
  • White Twitter Icon
  • White YouTube Icon

© Bridge Digital, Inc. All rights reserved. Website designed by Creative Instinct

The EB34TD1T-SM is an electrical emSFP transmitter module designed to convert SDI to an HDMI signal output without scaling artifacts. 

The video sfp EB34TD1T-SM is an 3G/HD/SD SDI to HDMI1.4 and DVI1.0 video sfp (emSFP) converter. This video SFP is designed to convert 3G/HD/SD SDI to  HDMI 1.4 signal without scaling artifacts.

Up to 8 channels of 3G/HD/SD-SDI audio channels are re- embedded in the HDMI stream.


    • SMPTE 424M, 292M and 259M compliant
    • SDI Reclocked Loopback to host connector
    • Supported format: 525/625, 720p/1080i (50/59.94/60Hz), 1080p (23.98/24/15/29.97/30/50/59.94/60Hz)
    • HDMI/DVI Output:
    • 24 bit (3x8 bits)
    • RGB 4:4:4, YCbCr 4:2:2, YCbCr 4:4:4
    • RGB Range (Full/SMPTE)
    • Up to 2 channel audio embedding (PCM)
    • HDMI 1.4 Type D connector
    • HDMI Type D plug with retention
    • Control via serial interface includes:
    • Voltage & Temperature Monitoring
    • HDMI/DVI interface configuration
    • EDID reading, Audio mapping
    • Module Information
    • Low Power Consumption - Single Supply +3.3V 58.5mm x 13.4mm x 8.6mm SFP Package Operating temperature: -20°C to 80°C
    • Delay : 40 to 200 pixels (depending on the video format and the frequency of the conversion; if applicable)
    • High-density and future-proof architecture
    • Pathological signal support
    • Superior jitter management and signal regeneration
    • Monitoring and diagnostics at the edge of your product via serial communication
    • Superior link budget performance compares to the ST-297 specification
    • Highest optical performance (fiber stub) and lowest defect rate in the market